|
By adding TRUST ME TIE-DOWN SEATS product line, it allows
us to offer the finest quality tie-down built to the size, color and strength
you want. Custom orders are no problem, plus we offer 11 different colors
of 1" webbing and 4 colors of 2" webbing. With our manufacturing facility
we can custom build to order or ship direct from our finished inventory.
when making your tie-down decisions, load ratings are very important.
For example on a 5,000lb maximum rated capacity tie-down, 1,666lbs would
be safe working load, 5,000lb hardware and 10,000lb webbing combine to
make a 5,000lb tie-down, it is therefore important that all components
are rated the same. SWL = SAFE WORKING LOAD MRC = MAXIMUM RATED CAPACITY
|
|
Use these straps to wrap around the vehicle axle or
where a tie-down is necessary and a loop is necessary and a loop is needed
to secure the cargo. These straps use 2"x24" webbing with a 15"tough Cordura
protective sleeve and D-rings at each end. Available in two styles: heavy
duty, SWL 3300lbs - MRC - 10000lbs and light duty. SWL 1600lbs - MRC 5000lbs.
|
|
|
The Extensions shown above displays the twisted loop
at one end, which allows for the extension to wrap flat around the bar
when looped through itself. Perfect for handle bars, frame rails, etc.
Extension are 1"x18". Also shown are the 11 different colors available
for 1" tie-downs. Special sizes are available upon request. SWL: 500lbs
MRC 1500lbs.
|
|
|
Quality 2" (20,000lb. capacity) and 3" (30,000lb capacity)
straps available in 20' and 30' lengths. Made from high quality nylon,
which stretches a bit to soften the pull. Each comes standard with double
looped ends and sewn in wear pads to increase longevity. A 2"x6' tree
protector is also available.
|
|
|
LIMITING STRAPS
|
Available in two styles - "doubles" and "quads." Quads
have 4 layers on each end to handle the most extreme of conditions. Made
from high quality US made 1m75" nylon webbing with a 5000lb. rating. The
quality nylon webbing has superior flexibility. Plus, limiting straps
can be ordered in 1" increments from 8" - do" and are available in black,
red and blue. The plated end fittings are made from tough 4130 steel with
a 9/16" eyelet and have an integrated deflector clip to minimize abrasion.
Figure the length required and add a 1/2" to 1" for stretch depending
upon the length required and add a 1/2" to 1" for stretch depending upon
the length of the strap. MRC: 5000lbs-10,000lbs.
|
|
ADJUSTABLE AXLE STRAP Order Info |
Use this tie-down only when it is necessary to ratchet
one end of the vehicle down. Use as a straight tie-back or axle strap,
this strap is offered in 36", 42" and 60" lengths and has the flexibility
to adjust to a desired length. Also available is an Axle Strap Adapter
Kit. Use this kit to convert a standard ratchet tie-down into a combo
axle strap tie-down. Available in two styles: HD, SWL 3300lbs - MRC 10000lbs
and LD, SWL 1600lbs - MRC 5000lbs.
|
|
ADJUSTABLE CLEVIS
Order Info |
Custom built for our limiting strap. Strong steel clevis
is design to install limiting straps and allow strap to articulate and
accommodate suspension travel. Specially designed stainless bushings allow
for multiple strap combinations. Longs 3"x1/2" shank allows for travel
extension adjustment. This is the best solution to installation, adjustability,
and increased strap life.
|
